Medical centrifuges are the new favorites in the modern pharmaceutical industry.
Release time:
2016-01-12
Overview:
Medical centrifuge
Medical centrifuge It has become a new favorite in the modern pharmaceutical industry and is one of the fastest-growing segments within the sector. With the development of contemporary society, the pharmaceutical industry has become increasingly intertwined with people’s daily lives, making it imperative to rely heavily on advanced technological support. Medical centrifuges merely contribute modestly to the pharmaceutical industry, yet they have made significant contributions to its overall development. Alongside the rapid advancements in life sciences and medicine over recent years, medical centrifuges have also made substantial progress, establishing a distinct market segment that sets them apart from low-speed centrifuges. It is expected that this upward trend will continue in the future, attracting even more research institutions to enter the field. Moreover, medical centrifuges represent the fastest-growing category in terms of technological advancement within the centrifuge industry. A medical centrifuge operates by using a motor to drive a rotor at high speed. In earlier models, the motors were DC motors equipped with carbon brushes. During operation, these carbon brushes wore down, producing sparks, noise, and vibrations. Additionally, carbon brushes had a limited lifespan, requiring replacement before the motor could resume functioning. Even more problematic was the wear of carbon brushes, which generated carbon dust that not only contaminated the centrifuge itself but also spread throughout the surrounding environment. Such contamination is entirely unsuitable for the healthcare sector.
In the design and manufacture of medical centrifuges, any imbalance caused by machining errors in the rotor is corrected through dynamic balancing tests. However, all centrifuges have a permissible limit for sample loading imbalance. To compete with other manufacturers on the maximum allowable imbalance limit, centrifuge manufacturers tend to specify relatively high values. At these higher imbalance levels, the centrifuge can still operate—but the resulting unbalanced forces will suddenly impact the bearings and support structures at a frequency of n times per minute. Medical centrifuge It has been damaged. Therefore, users should take care to achieve proper balance before centrifuging expensive centrifuges—this will help extend the lifespan of the centrifuge. Centrifuge rotors are typically made of aluminum alloy; once corroded, their strength diminishes, making them prone to accidents. Aluminum alloys are susceptible to liquid corrosion, so after cleaning, be sure to dry them thoroughly using a hairdryer or by inverting them for a while to ensure they’re completely dry before use. Some blood banks’ imported centrifuges lack the six plastic holders that should normally be included with the six aluminum cups. These plastic holders are designed to hold blood bags; never place blood bags directly into the aluminum cups. Also, carefully inspect test tubes for cracks. If a test tube—especially one that’s been used repeatedly—shows even the slightest crack, absolutely do not use it. Otherwise, during operation, a cracked tube could cause imbalance during rotor rotation, potentially leading to catastrophic incidents such as shaft breakage.
During operation, liquid and gas phases may seep into the medical centrifuge, causing corrosion on the tapered surface of the main spindle and even penetrating into the bearings, thereby damaging them and affecting the normal operation of the machine. The upper bearing cover is typically equipped with structures such as skeleton seals; however, a portion of the space between the upper bearing cover and the conical hole of the rotor drum remains exposed. As a result, the gas phase within the centrifuge’s internal cavity could potentially corrode the exposed surfaces of the main spindle. Since the materials separated by centrifuges used in the pharmaceutical industry often contain organic solvents or media such as acids, bases, and salts, it is crucial to take these sealing requirements for these areas into full consideration when ordering equipment.
The operation of medical centrifuges places stringent requirements on the surrounding environment. Under high-grade environmental conditions—such as in sterile workshops, which may be classified as Class 10,000 or Class 100,000 workshops—excellent sealing performance ensures effective isolation between the external environment and the interior of the machine. Generally, when placing an order, the user should inform the centrifuge manufacturer of their sealing requirements. The manufacturing manufacturer should... Medical centrifuge Improve the sealing performance through design optimization and fully implement this during manufacturing.
In the design and manufacture of medical centrifuges, any imbalance caused by machining errors in the rotor is corrected through dynamic balancing tests. However, all centrifuges have a permissible limit for sample loading imbalance. To compete with other manufacturers on the maximum allowable imbalance limit, centrifuge manufacturers tend to specify relatively high values. At these higher imbalance levels, the centrifuge can still operate—but the resulting unbalanced forces will suddenly impact the bearings and support structures at a frequency of n times per minute. Medical centrifuge It has been damaged. Therefore, users should take care to achieve proper balance before centrifuging expensive centrifuges—this will help extend the lifespan of the centrifuge. Centrifuge rotors are typically made of aluminum alloy; once corroded, their strength diminishes, making them prone to accidents. Aluminum alloys are susceptible to liquid corrosion, so after cleaning, be sure to dry them thoroughly using a hairdryer or by inverting them for a while to ensure they’re completely dry before use. Some blood banks’ imported centrifuges lack the six plastic holders that should normally be included with the six aluminum cups. These plastic holders are designed to hold blood bags; never place blood bags directly into the aluminum cups. Also, carefully inspect test tubes for cracks. If a test tube—especially one that’s been used repeatedly—shows even the slightest crack, absolutely do not use it. Otherwise, during operation, a cracked tube could cause imbalance during rotor rotation, potentially leading to catastrophic incidents such as shaft breakage.
During operation, liquid and gas phases may seep into the medical centrifuge, causing corrosion on the tapered surface of the main spindle and even penetrating into the bearings, thereby damaging them and affecting the normal operation of the machine. The upper bearing cover is typically equipped with structures such as skeleton seals; however, a portion of the space between the upper bearing cover and the conical hole of the rotor drum remains exposed. As a result, the gas phase within the centrifuge’s internal cavity could potentially corrode the exposed surfaces of the main spindle. Since the materials separated by centrifuges used in the pharmaceutical industry often contain organic solvents or media such as acids, bases, and salts, it is crucial to take these sealing requirements for these areas into full consideration when ordering equipment.
The operation of medical centrifuges places stringent requirements on the surrounding environment. Under high-grade environmental conditions—such as in sterile workshops, which may be classified as Class 10,000 or Class 100,000 workshops—excellent sealing performance ensures effective isolation between the external environment and the interior of the machine. Generally, when placing an order, the user should inform the centrifuge manufacturer of their sealing requirements. The manufacturing manufacturer should... Medical centrifuge Improve the sealing performance through design optimization and fully implement this during manufacturing.