A series of requirements for the design and use of low-temperature centrifuges

Release time:

2016-05-06


Overview:

In both the design and operation of low-temperature centrifuges, certain safety requirements must be strictly followed. Next, our editor will briefly introduce the safety requirements and measures involved in the design and manufacturing of low-temperature centrifuges.
At Low-temperature centrifuge During both the design and operation of these devices, certain safety requirements must be strictly followed. Next, the editor will briefly introduce the safety requirements and measures involved in the design and manufacturing of low-temperature centrifuges.
1. Basic Requirements for the Design and Use of Low-Temperature Centrifuges
1) The strength calculation for the rotor of a low-temperature centrifuge shall comply with the provisions defined in the scope of application specified in JB/T 8105. Its structure and all its components and parts must possess sufficient strength, rigidity, and stability.
2) The low-temperature centrifuge shall ensure safe and reliable operation under the specified working conditions, and shall be easy to operate and maintain. Under the condition that operators comply with the operating procedures, the safety protection devices shall guarantee personal safety.
3) When manufactured, installed, stored, transported, and used in accordance with the specified conditions, it must not pose a threat to personal safety or cause injury.
2. Requirements for Noise and Vibration of Low-Temperature Centrifuges
1) The noise limits for low-temperature centrifuges shall comply with the requirements specified in the relevant product technical standards, and the measurement method shall conform to the provisions of GB 10894.
2) The vibration limits of low-temperature centrifuges shall comply with the requirements specified in the relevant product technical standards, and the measurement method shall conform to the provisions of GB 10895.
3. Sealed and Explosion-Proof Requirements for Low-Temperature Centrifuges
1) Centrifuges operating in enclosed, flammable, explosive, or humid environments shall comply with relevant standards or regulations concerning enclosure, flame retardancy, explosion-proof measures, and moisture resistance.
2) Centrifuges operating in enclosed, flammable, explosive, or humid environments shall be equipped with reliable safety protection measures.
4. Welding Requirements for Low-Temperature Centrifuges
1) The welding of the rotating drum must be performed by welders holding a qualified welder’s certificate for pressure vessels issued by the labor authorities. The weld seams of the liquid-retaining plates shall be staggered relative to the longitudinal weld seams of the rotating drum.
2) The welding procedure specifications shall be developed in accordance with the technical requirements specified in the drawings and the approved welding procedures. The welding procedure qualification report, welding procedure specifications, and welding records shall be retained for a period of no less than 7 years.
3) The number of rework operations, the locations involved, and the details of the rework shall be recorded in the machine’s quality documentation. The reworked areas of austenitic stainless steel welds must retain their original resistance to intergranular corrosion.
5. Material requirements for low-temperature centrifuges
1) Materials used for manufacturing the main components of centrifuges may be substituted with materials that have equal or superior performance, provided that such substitution is approved by the design department.
2) Centrifuges used in the pharmaceutical and food industries shall have their components and parts that come into contact with materials comply with the relevant national standards for pharmaceutical and food hygiene.
3) The mechanical properties and chemical composition of the centrifuge rotor drum and spindle materials shall comply with the standard specifications and shall be accompanied by material quality certificates. The centrifuge manufacturer shall inspect the materials in accordance with these certificates and, if necessary, conduct retesting.
More about Low-temperature centrifuge For more information, we encourage everyone to continue following our company’s website to stay informed!