The Luxiangyi portable centrifuge for phosphorus removal from surface water—mobile power sources can be purchased through these channels.
Release time:
2020-01-16
Overview:
To promote the improvement of the national surface water quality monitoring technology system and standardize the technical requirements for total phosphorus monitoring in surface waters, the China National Environmental Monitoring Center recently issued the document titled "Technical Specifications for On-site Pre-treatment of Total Phosphorus in Surface Waters (Trial)."
Total phosphorus and total nitrogen have become the primary pollutants affecting surface water quality. To address the increasingly serious issue of nitrogen and phosphorus pollution, the Ministry of Ecology and Environment has incorporated total phosphorus and total nitrogen as essential indicators into the national monitoring and evaluation system for automatic water-quality stations. Moreover, the recently released regulations issued by the China National Environmental Monitoring Center further clarify the methods and technical requirements for on-site pretreatment of total phosphorus in surface waters. These guidelines apply to manual monitoring of total phosphorus in surface waters (such as rivers, lakes, and reservoirs), and automatic water-quality monitoring systems may follow these guidelines by reference.
The issuance of this regulation will be of great significance for improving surface water quality. Meanwhile, the release of this regulation will also have implications for instruments and equipment, such as... Centrifuge Higher requirements have also been proposed. Notably, the annex to this regulation contains specific provisions focusing on centrifuges among the instruments and equipment listed.

TD5.5 Benchtop High-Capacity Centrifuge

TD5M Multi-Tube Rack Automatic Balancing Centrifuge
According to the regulations, in addition to using on-site portable centrifuges, corresponding standards have also been established for the technical specifications of centrifuges: the centrifuge’s rotational speed must reach 2,000 rpm, the minimum centrifugation time is 2 minutes, and each centrifugation run must involve at least 1 liter (1,000 ml) of water sample.

The 500ml × 4 round-bottom rotor can be optionally equipped with a 250ml × 4 adapter.

The 500ml × 4 sharp-bottom rotor can be optionally equipped with a 250ml × 4 adapter.
As a result, centrifuges play a pivotal role in the treatment of total phosphorus in surface water, and they also place extremely high demands on the performance of the centrifuge products themselves.
The author has learned that Shanghai Luxiangyi Centrifuge Instrument Co., Ltd., as a professional centrifuge manufacturer, offers a comprehensive range of centrifuge models and specifications. Among these, the following models are available for phosphorus removal from surface water: the TD5.5 benchtop high-capacity centrifuge and the TD5M multi-tube rack automatic balancing centrifuge. Due to their numerous advantages, these models will play an important role in phosphorus removal from surface water.

500ml × 4 round-bottom centrifuge tubes

500ml × 4 conical-bottom centrifuge tubes
According to the introduction, the portable TD5M multi-tube rack automatic balancing centrifuge can reach a maximum speed of 5,000 rpm and has a capacity of up to 500 ml × 4. The portable TD5.5 benchtop high-capacity centrifuge can achieve a maximum speed of 5,500 rpm and offers a capacity of up to 500 ml × 4. Both models feature microcomputer control and are driven by high-torque AC variable-frequency motors, ensuring stable operation, low noise levels, and high rotational speed accuracy. Currently, the TD5.5 or TD5M centrifuges—whether with round-bottom or conical-bottom rotors—are commonly used for phosphorus removal from surface water. However, users should note that it’s preferable if customers have an onboard power supply. If no onboard power supply is available, a portable power source with a minimum output of 1,000 watts will be required, as the machine needs to be taken to the riverside to collect water and perform centrifugation.

200V/1000W outdoor portable power bank
A relevant representative from Lushangyi stated that Shanghai Lushangyi Centrifuge Instrument Co., Ltd. has specially developed the two centrifuge models mentioned above—both of which can be directly connected to portable power banks—in order to meet both the technical requirements for total phosphorus monitoring in surface water and to ensure ease of use for laboratory personnel. We will provide customers with guidance on purchasing portable power banks and instructions on how to connect them to these two centrifuge models. For more detailed information, please feel free to contact Lushangyi Centrifuge Company’s staff. You are welcome to call our hotline at 136 366 75110.