The centrifuge developed by Lu Xiangyi for hospital use features an automatic balancing device.

Release time:

2014-02-26


Overview:

During centrifugation, the centrifugal force is extremely high. Imbalance can lead to accidents. The Lu Xiangyi centrifuge is equipped with an automatic balancing protection device that ensures balanced operation and prevents malfunctions.
 After the doctor receives the blood collection tubes, they place them on a rack designed for vacuum blood collection tubes. Once a sufficient number of tubes have been collected, they are transferred to a centrifuge for spinning. A single tube cannot be spun by itself—centrifuges require balance during operation. Although some centrifuge rotors come pre-balanced, it’s still impossible to spin just one tube alone; rather, as long as the weight difference among the tubes isn’t too significant, the centrifuge can maintain normal operation. During centrifugation, the centrifugal force is extremely high, and any imbalance could lead to accidents. Lu Xiangyi centrifuges are equipped with an automatic balancing protection system that ensures proper balance and smooth operation.
  
  When doctors place test tubes into the centrifuge, they always do so in a symmetrical manner. Typically, the centrifuge is set for a duration of five minutes, with a rotation speed of 5,000 revolutions per second—though special tests may deviate from this standard. After starting the centrifuge, its rotational speed gradually increases until it reaches the preset value. Once the preset time has elapsed, the centrifuge will automatically stop. Due to inertia, the centrifuge’s speed will slowly decrease from the set value rather than coming to an immediate halt at zero. Therefore, after the centrifuge has stopped, the door cannot be opened right away; it must wait until the centrifuge’s speed has completely dropped to zero before the door can be safely opened. The centrifuge displays the current rotational speed on its screen, allowing doctors to monitor it directly. When the speed reaches zero, the doctor removes the centrifuged blood collection tubes, places them onto a tube rack, and then sends them off for further analysis.