Analysis of the Five Operational Steps for Total Phosphorus in Surface Water Using a Portable Centrifuge
Release time:
2022-11-16
Overview:
The portable centrifuge for total phosphorus in surface water is, conceptually speaking, a centrifuge designed specifically to measure total phosphorus in surface water. Another distinctive feature of this centrifuge is its compact and portable design.
It can be referred to as a water treatment centrifuge. When using it, you’ll need to equip it with either a 250ml × 4 conical-bottom horizontal rotor or a 500ml × 4 horizontal conical-bottom rotor, or alternatively, a 500ml conical-bottom rotor paired with a 250ml conical-bottom adapter.
Function:
The centrifuge features microcomputer control and is driven by a high-torque AC variable-frequency motor, ensuring stable operation, low noise, and high rotational speed accuracy.
Touch panel, programmable operation; host operating parameters can be set according to requirements and automatically stored.
Large-screen LCD display with a user-friendly interface for simple and convenient operation. Real-time conversion and setting between RPM and RCF readings—fast and hassle-free.
Equipped with an electronic door lock, it features multiple protective functions such as automatic door-latch locking and overspeed protection; it also includes an automatic fault-alarm function, ensuring safety and reliability.
It uses an integral sealing ring made of food-grade silicone rubber, which is GMP-certified and has also obtained U.S. FDA certification.
There are also 10 program rise/fall rate curves, and the rise/fall time can be set as needed.

The operational procedure for using a portable centrifuge to detect total phosphorus in surface water is actually quite simple and can be roughly divided into the following five steps:
1. When using various centrifuges, it is essential to precisely balance the centrifuge tubes and their contents on a balance beforehand. The weight difference during balancing must not exceed the range specified in the instruction manual for each particular centrifuge. Different rotors of each centrifuge have their own allowable weight differences. An odd number of tubes must never be loaded into a rotor. When the rotor is only partially loaded, the tubes must be arranged symmetrically opposite each other within the rotor to ensure that the load is evenly distributed around the rotor’s circumference.
2. If centrifugation is to be performed at a temperature below room temperature, the rotor should be placed in a refrigerator or pre-cooled in the rotor chamber of the centrifuge before use.
3. During the centrifugation process, do not leave your post arbitrarily. You should continuously monitor whether the instruments on the centrifuge are functioning properly. If you hear any unusual noises, immediately stop the machine, inspect it, and promptly address any malfunctions.
4. Each rotor has its own maximum allowable speed and cumulative usage limit*. When using a rotor, be sure to consult the instruction manual and never exceed the specified speed. Each rotor must have a dedicated usage record documenting its cumulative operating time. If the cumulative usage exceeds the rotor’s maximum allowable limit*, it must be used at a reduced speed as prescribed.
5. When loading the solution, follow the specific operating instructions for each centrifuge model. Select appropriate centrifuge tubes based on the properties and volume of the liquid to be centrifuged. Some centrifuge tubes do not have lids; therefore, do not overfill them, as this could cause the liquid to splash out during centrifugation, leading to rotor imbalance, rusting, or corrosion. For preparative ultracentrifuge tubes, it is often required to fill them completely to prevent the upper part of the plastic tube from collapsing and deforming during centrifugation. After each use, carefully inspect the rotor, promptly clean and dry it thoroughly. The rotor is a critical component that requires special protection in the centrifuge. Handle it with care during movement—avoid any collisions or impacts that might cause scratches. If the rotor is not used for an extended period, apply a layer of polishing wax for protection. Never use centrifuge tubes that are significantly deformed, damaged, or aged.