Where is the “big data and cloud information” of the centrifuge reflected?
Release time:
2018-11-10
Overview:
Preface: In today’s society, the development of every industry relies on technological advancement—and the centrifuge industry is no exception. Recently, a new type of programmable controller has emerged, specifically designed for the centrifuge industry, leveraging big data, cloud computing, and other advanced technologies!
Centrifuge By using a programmable memory, the device can store programs internally and execute commands for performing logical operations, sequential control, timing, counting, arithmetic calculations, and other functions. Through digital and analog inputs and outputs, it can control various types of machinery or production processes. Both the programmable controller and its associated equipment should be designed according to principles that facilitate easy integration into industrial control systems and enable straightforward expansion of functionality. The controller performs logical and mathematical operations and coordinates the overall operation of the system. The memory is divided into system program memory and user program memory, which are used to store system programming programs, monitoring and runtime programs, user programs, process variables involved in logical and mathematical operations, and all other relevant information.
As a result, centrifuges employing this design have become both economical and practical: one instrument offers three rotor options—angle rotors; horizontal rotors specifically designed for red blood cell washing; and horizontal rotors suitable for microcolumn gel assays. Rotor changes are simple and quick.
◆Easy to operate: Built-in with 11 working programs; standard procedures specifically designed for various serological blood typing experiments; additionally, users can customize programs as needed, ensuring both clinical testing and research are standardized and规范化.
◆Precise centrifugal force: Quick start-up, speed measurement timing, automatic braking—resulting in more accurate centrifugal force.
◆Wide applicability: Suitable for routine serological blood typing; red blood cell washing (washing 12 test tubes is as simple as washing a single tube); microcolumn gel immunoassay experiments, and more. The six-tube system simplifies the cumbersome procedures of traditional tube-based assays, reduces centrifugation time, and makes result interpretation easier.
In many industries, the basic principle behind using centrifugation to separate biomacromolecules and subcellular components is that these substances can be distinguished by virtue of their differing sedimentation rates in a liquid medium—forming distinct bands—or by their varying densities, which cause them to settle at different positions within the liquid medium. The former method is known as the sedimentation velocity technique. When employing this method, the maximum density of the liquid medium must be lower than the density of the smallest particles in the sample; during centrifugation, a high rotational speed and short duration are used. The latter method is called the sedimentation equilibrium technique. In this case, the maximum density of the liquid medium must exceed the density of the smallest particles in the sample; during centrifugation, a lower rotational speed and longer duration are chosen.
There are several forms of actual operation:
Differential centrifugation
This method involves centrifuging at different speeds to separately isolate various components. For example, first, low-speed centrifugation is used to pellet large particles and obtain the supernatant; then, high-speed centrifugation is employed to pellet medium-sized particles from the supernatant; finally, ultracentrifugation is used to pellet small particles from the supernatant. By gradually increasing the centrifugal force in successive steps, this method effectively separates particles of different sizes.
This method is relatively simple and convenient. The separated components settle to the bottom of the tube, allowing for rapid concentration of the desired component and reduction in volume. However, there is a trade-off between recovery rate and purity: to improve the recovery rate, one must either increase the centrifugal speed or extend the centrifugation time, which in turn may cause particles of similar size to also settle to the bottom of the tube. Therefore, this method is more commonly used for crude purification or preliminary concentration of samples.
Velocity-zonal (or velocity-gradient) centrifugation
This method involves placing the sample on a continuous density gradient liquid. By centrifugation, larger particles sediment more quickly, while smaller particles sediment more slowly. After a certain period of time, particles of the same size will have settled to the same depth.
It forms a band, thereby separating the various components. This method is suitable for separating substances that have the same density but differ in size—for example, different protein components often have similar densities but different molecular weights, making them easy to separate using this technique. However, it is less effective for separating substances that have different densities but similar sizes.
A sucrose gradient is a commonly used medium. Gradients are prepared by mixing sucrose solutions of varying concentrations (5%–60%) and used for density-gradient centrifugation. The various components located in different zones are then collected separately.
Sedimentation equilibrium centrifugation
This is the method of static equilibrium. A liquid gradient is formed in a centrifuge tube, and during centrifugation, each component sinks at a different rate but ultimately comes to rest at its own density, forming a narrow equilibrium zone that remains relatively stable. To ensure that all components of the sample reach their equilibrium positions, prolonged centrifugation is required.
Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. has over forty years of development history. With both extensive experience and an excellent reputation, it is a trusted name in the centrifuge industry. Shanghai Luxiangyi is also one of the few Chinese centrifuge manufacturers that have obtained FDA certification in the United States. Additionally, the company has achieved ISO9001:2015 quality system certification, ISO13485:2003 quality system certification, and CE certification. We warmly invite all centrifuge users to visit us, engage in discussions, and exchange ideas!