PRP separation method
Release time:
2015-08-07
Overview:
PRP separation methods: primarily two types—plasma separation and buffy coat method.
Plasma separation method: After gently centrifuging anticoagulated fresh whole blood, the PRP above the buffy coat is squeezed into a plasma bag and subjected to another round of centrifugation, leaving behind a small amount of PPP and sedimented platelets. This method can achieve a platelet concentration up to 5.2 times that of whole blood, with TGF-β1 levels 4.3 times higher than in whole blood and TGF-β2 levels 3.6 times higher.
The buffy-coat method involves gently centrifuging anticoagulated fresh whole blood, then retaining the 40 ml above the buffy coat layer. The remaining plasma plus approximately 60 ml of red blood cells from the buffy coat layer are further centrifuged to obtain a turbid plasma fraction located above the red blood cells. Using this method, the platelet concentration can reach up to 9.2 times that of whole blood, and the TGF-β1 concentration is 2.8 times that of whole blood.
With the widespread clinical application of PRP, automated blood separation devices for PRP tailored to various specialties have also emerged—more than a dozen such devices already exist. Most of these devices employ the buffy coat method. These instruments are easy and quick to use, and they can promptly reinfuse the separated blood components back into the donor’s body.
When preparing PRP, an anticoagulant—10% sodium citrate and EDTA—should be added to the plasma. During centrifugation, sterility must be maintained, and the procedure must be carried out under conditions where platelets remain intact and undissolved. The biological activity and concentration of the prepared PRP are clearly causally related to the number of centrifugation cycles, the centrifugal speed, and the duration of centrifugation.
Previous: