Centrifuge safety must be considered from multiple aspects.

Release time:

2020-09-04


Overview:

Compared with any other mechanical separation method, the centrifugal separation method used in centrifuges can produce products with lower moisture content and higher purity, while also saving labor and improving efficiency. However, the equipment is relatively complex to manufacture, resulting in higher capital investment costs.

   Centrifuge Centrifugal separation offers lower moisture content and higher product purity compared to any other mechanical separation method, while also saving labor and improving efficiency. However, the equipment is relatively complex to manufacture, resulting in higher capital investment costs.

  In daily operations, ensuring stable performance is a prerequisite for improving separation efficiency and enhancing operational safety. This is a systematic undertaking that requires attention to every detail in routine operation. So, when using a reliable, ultra-large-capacity refrigerated centrifuge on a daily basis, how can we ensure smooth operation? Let’s take a closer look below:

  First, strengthen equipment management, paying particular attention to equipment cleaning—especially the rotor. This will help reduce the accumulation of contaminants on the rotor and prevent vibrations caused by uneven rotor loading.

  2. The flocculant storage device needs to be cleaned regularly to reduce adhesion to the rotor. This ensures that the rotor experiences uniform forces during operation and functions effectively under normal equipment conditions.

  Third, we also need to strengthen training for operators. Operation is a systematic process, and every step must be performed accurately and flawlessly. Operators must be well-prepared to handle unexpected situations—for example, promptly adjusting the reflux opening according to production needs.

  4. During initial installation, vibration under operating conditions should be taken into account. Use a robust steel structure as the base, and then, through connections to pipelines, dynamically assess the machine’s vibration amplitude based on the load.

  Centrifuge Development Trends:

  1. Moving toward large-scale production, the MP combination model structure holds promising potential.

  2. Standardize components and manufacture machines capable of adjusting various parameters to broaden their range of applications.

  3. Improve the rotor material to accommodate a wider range of corrosive materials.

  4. Improve the screen mesh structure and screen mesh material to further enhance solid recovery rate and screen mesh life.

  For low-speed centrifuges with relatively low operating speeds, the critical speed is generally raised as much as possible, so that the centrifuge operates below its critical speed. Such centrifuges have thick shafts with high rigidity; these are referred to as rigid shafts. When very high rotational speeds are required, the critical speed is minimized as much as possible, and the shaft is made thinner with lower rigidity—these are called flexible shafts. Modern ultracentrifuges all employ flexible shafts.

  The critical speed is related to both the centrifuge itself and the rotor it is equipped with. A single centrifuge can be fitted with several different types of rotors; therefore, when designing a centrifuge, it’s essential to take into account the vibration-damping design’s compatibility with various rotors. Centrifuges operate over a wide range of speeds—from several thousand to tens of thousands of revolutions per minute. The higher the rotational speed at which vibration occurs in a centrifuge, the greater the associated risk.

  Although centrifuges may seem simple and require little technical expertise to operate, proper use and maintenance are still essential. Once a malfunction occurs, it can delay experiments—and the resulting inconvenience simply isn't worth it. Therefore, it’s important to pay attention to whether the centrifuge tubes are balanced, whether the rotation speed exceeds the set limit, and whether the rotor shows signs of corrosion.