Quick Facts About Pocket-Sized Centrifuge Technology

Release time:

2023-03-15

Overview:

A handheld centrifuge is a miniaturized centrifuge used for the centrifugal separation and concentration of samples. Its principle is based on centrifugal force, which separates substances in solutions of different densities into distinct layers. When a sample is placed inside the centrifuge and subjected to high-speed rotation, it experiences an outward centrifugal force. This force causes the substances within the sample to stratify according to their densities, thereby achieving separation.

　　I. Principle of the Handheld Centrifuge

　　A handheld centrifuge is a miniaturized centrifuge used for the centrifugal separation and concentration of samples. Its principle is based on centrifugal force, which causes substances in solutions of different densities to separate into layers. When a sample is placed inside the centrifuge and subjected to high-speed rotation, the sample experiences an outward centrifugal force. This force causes the substances within the sample to stratify according to their densities, thereby achieving separation.

　　Unlike traditional desktop centrifuges, the handheld centrifuge features a horizontal rotation of its centrifuge tubes rather than a vertical one. This design allows for more uniform sample layering and also reduces the centrifuge’s overall size, making it easier to carry and operate.

　　II. Features of the Handheld Centrifuge

　　1. Compact and Portable: The pocket-sized centrifuge is small in size and lightweight, making it easy to carry and use anytime, anywhere.

　　2. High centrifugal efficiency: With high centrifugal speed, it can be used for rapid centrifugal separation and concentration of samples.

　　3. Easy to operate: The operation is extremely simple—just stick the sample onto the bottom of the centrifuge tube.

　　4. Safe and Reliable: The handheld centrifuge is equipped with multiple safety protection features to ensure safe operation.

　　III. Installation and Operation

　　1. Remove the centrifuge from its packaging and confirm that the centrifuge and its accessories are undamaged.

　　2. Plug the centrifuge’s power connector into the adapter’s output port, and then plug the adapter’s plug into a power outlet.

　　3. After firmly twisting and loosening the acrylic rotor of the centrifuge tube, remove it from the centrifuge. Place it into the rotor corresponding to the sample requiring centrifugation, according to the usage instructions, and secure it once the rotor has been released.

　　4. Attach the required centrifuge tubes to the rotor, ensuring that they are not fastened too tightly, as excessive force during operation could cause the tube bottoms to rupture.

　　5. After the centrifuge has been stopped, be sure to shut it down in the correct sequence and turn off the power supply.

　　IV. Maintenance

　　1. The maintenance of the centrifuge should be performed after it has been shut down, and the centrifuge must be kept dry and clean.

　　2. The dry film left by the sample on the centrifuge tube tends to accumulate on the inner wall of the centrifuge, which can affect the centrifugation efficiency. Therefore, it’s important to wipe and clean it promptly.

　　3. Regularly check whether the connecting components of the centrifuge are loose or damaged, and address any issues promptly.

　　4. If the centrifuge is not used for an extended period, it should be disassembled, cleaned, and stored in a dry, well-ventilated place to prevent issues such as corrosion or calcification.

　　5. Regularly check whether the rotating components of the centrifuge’s mechanism are lubricated with smooth oil (self-maintenance is not recommended).

　　Improper maintenance can lead to poor centrifugal performance, shorten the lifespan of the centrifuge, or even pose safety hazards. Therefore, maintaining your centrifuge is crucial—developing good habits early on will help you achieve better operational results.

Five-Stage Analysis and Explanation of the Pocket-Sized Centrifuge

Centrifuge Price Market Analysis