How can low-temperature centrifuge companies grasp the market pulse?

Release time:

2016-05-31


Overview:

Low-temperature centrifuge Equipped with a specially designed rotor and optical detection system, this instrument continuously monitors the sedimentation process of substances in a centrifugal field, enabling the determination of their physical properties. It is widely used to collect microorganisms, cellular debris, cells, large organelles, sulfate precipitates, and immunoprecipitates, and is extensively employed in modern biochemical laboratories worldwide.
To ensure the stable and efficient operation of a low-temperature centrifuge, users should provide it with a high-quality operating environment and follow proper operating procedures, which include the following points:
1. The floor must be level and stable: For large centrifuges, the floor at the installation site must be sturdy and well-secured to ensure that the centrifuge rotor operates smoothly without sinking or deforming. The ground where the centrifuge is installed and fixed should be both level and solid.
2. Adjust the level: Find a small, highly accurate spirit level. With the centrifuge lid open, locate the horizontal position on the spindle. Adjust the level by turning the adjusting bolts located next to the four casters. Be sure that one of the casters does not lift off the ground.
3. Power Supply Voltage: The voltage fluctuation must comply with the national standard within ±10%. Otherwise, centrifuges from certain manufacturers may fail to operate properly. If the voltage fluctuation exceeds this range, it is recommended to use a voltage stabilizer to ensure compliance with the power grid requirements.
4. The grounding wire must be secure: The wiring of the room’s power supply must meet the required standards. In China, the power system uses a three-phase four-wire configuration. The three phases refer to the three-phase electricity used in industrial settings. When using three-phase power, the neutral wire and the ground wire must be kept separate. More importantly, whether it’s three-phase industrial power or ordinary single-phase power, the ground wire must be reliably connected to prevent electric leakage. Under no circumstances should the ground wire be connected to heating pipes or water pipes.
5. The area surrounding the low-temperature centrifuge should be free of corrosive gases and electromagnetic interference to prevent premature failure of the instrument’s surface protective coating and interference with electrical components.
Nowadays, Low-temperature centrifuge The entire industry is entering a new golden era of development. In the course of rapid growth, there will inevitably be a survival-of-the-fittest dynamic—a natural rule of the market. Yet this very dynamic also presents opportunities for companies to thrive. Only by promptly adjusting their development strategies and innovating their management models can centrifuge manufacturers maintain their vitality, sustain growth, and ensure continued development. For more information on low-temperature centrifuges, we invite you to keep following our company’s website!