The principle and characteristics of the centrifuge separation process
Release time:
2012-02-14
Overview:
The separation processes in centrifuges generally include three types: centrifugal filtration, centrifugal sedimentation, and high-speed separation. Centrifugal filtration is commonly used to separate solid-liquid mixtures with relatively high solid content and larger particle sizes.
In choosing Centrifuge First, it is essential to know the chemical composition of the material being processed, its viscosity and pH value, whether the material is a suspension or an emulsion, as well as the concentrations of its solid and liquid phases. Additionally, you need to be aware of the size—coarse or fine—of the solid particles in the material, and the operating temperature. In industrial production, various types of suspensions are commonly encountered, and in most cases, the particle diameters within a suspension can vary significantly. The viscosity of a suspension increases as the concentration of solid particles rises.
2. Characteristics and Applications of the Centrifuge Separation Process
The separation processes in centrifuges generally fall into three categories: centrifugal filtration, centrifugal sedimentation, and high-speed separation. Centrifugal filtration is commonly used to separate solid-liquid mixtures with relatively high solid content and large particle sizes. The separation process typically consists of three stages: In the first stage, solid particles are deposited onto the inner wall of the rotating drum under the action of centrifugal force, forming a filter cake. Meanwhile, the filtrate is also forced through the mesh of the drum by centrifugal force and discharged as liquid. In the second stage, the filter cake is compacted under the action of centrifugal force, squeezing out any remaining liquid trapped within it. In the third stage, the liquid remaining in the pores of the filter cake continues to be expelled under the influence of centrifugal force, further drying the filter cake.
The centrifugal sedimentation process can be used to separate suspensions containing fine solid particles. The separation process generally consists of two stages: In the first stage, solid particles are deposited onto the inner wall of the rotating drum under the action of centrifugal force. In the second stage, the layer of particles settled on the drum wall is compacted further under the influence of centrifugal force. When the suspension contains a relatively high solids content, a large number of particles accumulate rapidly, causing the sludge layer to thicken quickly; therefore, continuous sludge removal is required. However, when the suspension contains a low solids content, the settling particles can be regarded as individual particles undergoing free sedimentation under the action of centrifugal force, resulting in slow sludge layer growth. In such cases, an intermittent sludge removal method—also known as the centrifugal clarification process—can be employed.
The centrifugal separation process is used to separate emulsions formed by liquids of differing densities. Under the action of centrifugal force, the liquids stratify according to their density differences and are then drawn off separately.
Centrifugal clarification and centrifugal separation, since the amount of solid phase separated during these processes is relatively small or both phases are liquids, such high-speed centrifuges are relatively easy to operate continuously for feeding and discharging. However, they require a higher separation factor to achieve effective separation. These centrifuges are also referred to as separators.
3. Separation Factor, Classification, and Model Numbers of Centrifuges
Let W denote the angular velocity of the rotating drum (rad/s), R denote the radius of the rotating drum (m), and w denote the circumferential velocity of the rotating drum (m/s). Then, the ratio of the centrifugal acceleration to the gravitational acceleration is called the centrifugal separation factor.
The separation factor represents the characteristics of the centrifugal force field and serves as a measure of... Centrifuge An important factor affecting performance is the F-number: the larger the F-number, the higher the centrifuge's separation capability. Therefore, the greater the difficulty in separating a material, the more reasonable it is to use a centrifuge with a higher separation factor.
According to the separation factor F, centrifuges can be classified as follows: ordinary centrifuges have F ≤ 3500 (typically ranging from 300 to 1200); high-speed centrifuges have 5000 > F > 3500; and ultrahigh-speed centrifuges have F > 5000.
Common centrifuges are of the filtration type, but there are also sedimentation-type centrifuges. They are suitable for operations such as dewatering materials containing particles with equivalent diameters ranging from 0.010 to 10 mm—particularly coarse, medium-sized, short-fibered or lump-like materials. Due to their relatively low rotational speeds, these centrifuges generally feature larger drum diameters.
High-speed centrifuges are typically of the sedimentation and separation types, suitable for separating latex water or dilute suspensions and emulsions containing fine particles. Due to their high rotational speeds, these centrifuges generally have a smaller drum diameter but a longer length.
The ultrahigh-speed centrifuge is suitable for separating emulsions and colloidal solutions with high dispersion as well as gases of different molecular weights. Due to its extremely high rotational speed, the rotor is designed in a slender tubular shape.
Classified by type of operating procedure, centrifuges can be divided into filter-type centrifuges, sedimentation-type centrifuges, clarification-type centrifuges, and separation-type centrifuges.
Filter centrifuges are commonly used in industrial production, including such types as three-legged centrifuges, top-suspended centrifuges, horizontal scraper discharge centrifuges, and piston-discharge centrifuges.
This type of centrifuge is suitable for separating suspensions with relatively coarse particles or media containing a high solids content. The filter cake formed after separation can also be easily washed and dewatered, yielding a relatively dry filter residue. However, it is essential that the filter cake exhibits significant compressibility and that the particles are uniform in size, to prevent the filter cake or fine particles from passing through or clogging the filter mesh. Therefore, this type of centrifuge is not appropriate for materials with high dispersion and amorphous characteristics. Since the rotational speed of this centrifuge typically does not exceed 1500 r/min, its separation factor is relatively low, making it suitable primarily for separating easily filtrable slurries. This type of centrifuge is widely used for separating granular materials such as sugar, ammonium sulfate, and ammonium bicarbonate from their mother liquors, and it finds extensive applications in other industrial sectors as well.
The drum wall of a sedimentation centrifuge is non-porous. It operates on the principle that, due to the difference in specific gravity between the liquid and solid phases in a suspension, when the drum rotates at high speed, the liquid and solid phases separate under the action of centrifugal force and settle onto the drum wall at different rates. In some sedimentation centrifuges, the filter cake is discharged by a screw conveyor, while the filtrate flows out through an overflow port. This type of centrifuge is used for dewatering materials with significantly different solid-to-liquid ratios in easily filterable slurries and general slurries, as well as for highly dispersed, amorphous, insoluble materials.
Clarifying and separating centrifuges have solid drum walls without perforations, and are used to separate dilute suspensions and emulsions. This type... Centrifuge It has a very high rotational speed, typically ranging from 4,000 to 15,000 r/min, with a separation factor F > 3,500.
2. Characteristics and Applications of the Centrifuge Separation Process
The separation processes in centrifuges generally fall into three categories: centrifugal filtration, centrifugal sedimentation, and high-speed separation. Centrifugal filtration is commonly used to separate solid-liquid mixtures with relatively high solid content and large particle sizes. The separation process typically consists of three stages: In the first stage, solid particles are deposited onto the inner wall of the rotating drum under the action of centrifugal force, forming a filter cake. Meanwhile, the filtrate is also forced through the mesh of the drum by centrifugal force and discharged as liquid. In the second stage, the filter cake is compacted under the action of centrifugal force, squeezing out any remaining liquid trapped within it. In the third stage, the liquid remaining in the pores of the filter cake continues to be expelled under the influence of centrifugal force, further drying the filter cake.
The centrifugal sedimentation process can be used to separate suspensions containing fine solid particles. The separation process generally consists of two stages: In the first stage, solid particles are deposited onto the inner wall of the rotating drum under the action of centrifugal force. In the second stage, the layer of particles settled on the drum wall is compacted further under the influence of centrifugal force. When the suspension contains a relatively high solids content, a large number of particles accumulate rapidly, causing the sludge layer to thicken quickly; therefore, continuous sludge removal is required. However, when the suspension contains a low solids content, the settling particles can be regarded as individual particles undergoing free sedimentation under the action of centrifugal force, resulting in slow sludge layer growth. In such cases, an intermittent sludge removal method—also known as the centrifugal clarification process—can be employed.
The centrifugal separation process is used to separate emulsions formed by liquids of differing densities. Under the action of centrifugal force, the liquids stratify according to their density differences and are then drawn off separately.
Centrifugal clarification and centrifugal separation, since the amount of solid phase separated during these processes is relatively small or both phases are liquids, such high-speed centrifuges are relatively easy to operate continuously for feeding and discharging. However, they require a higher separation factor to achieve effective separation. These centrifuges are also referred to as separators.
3. Separation Factor, Classification, and Model Numbers of Centrifuges
Let W denote the angular velocity of the rotating drum (rad/s), R denote the radius of the rotating drum (m), and w denote the circumferential velocity of the rotating drum (m/s). Then, the ratio of the centrifugal acceleration to the gravitational acceleration is called the centrifugal separation factor.
The separation factor represents the characteristics of the centrifugal force field and serves as a measure of... Centrifuge An important factor affecting performance is the F-number: the larger the F-number, the higher the centrifuge's separation capability. Therefore, the greater the difficulty in separating a material, the more reasonable it is to use a centrifuge with a higher separation factor.
According to the separation factor F, centrifuges can be classified as follows: ordinary centrifuges have F ≤ 3500 (typically ranging from 300 to 1200); high-speed centrifuges have 5000 > F > 3500; and ultrahigh-speed centrifuges have F > 5000.
Common centrifuges are of the filtration type, but there are also sedimentation-type centrifuges. They are suitable for operations such as dewatering materials containing particles with equivalent diameters ranging from 0.010 to 10 mm—particularly coarse, medium-sized, short-fibered or lump-like materials. Due to their relatively low rotational speeds, these centrifuges generally feature larger drum diameters.
High-speed centrifuges are typically of the sedimentation and separation types, suitable for separating latex water or dilute suspensions and emulsions containing fine particles. Due to their high rotational speeds, these centrifuges generally have a smaller drum diameter but a longer length.
The ultrahigh-speed centrifuge is suitable for separating emulsions and colloidal solutions with high dispersion as well as gases of different molecular weights. Due to its extremely high rotational speed, the rotor is designed in a slender tubular shape.
Classified by type of operating procedure, centrifuges can be divided into filter-type centrifuges, sedimentation-type centrifuges, clarification-type centrifuges, and separation-type centrifuges.
Filter centrifuges are commonly used in industrial production, including such types as three-legged centrifuges, top-suspended centrifuges, horizontal scraper discharge centrifuges, and piston-discharge centrifuges.
This type of centrifuge is suitable for separating suspensions with relatively coarse particles or media containing a high solids content. The filter cake formed after separation can also be easily washed and dewatered, yielding a relatively dry filter residue. However, it is essential that the filter cake exhibits significant compressibility and that the particles are uniform in size, to prevent the filter cake or fine particles from passing through or clogging the filter mesh. Therefore, this type of centrifuge is not appropriate for materials with high dispersion and amorphous characteristics. Since the rotational speed of this centrifuge typically does not exceed 1500 r/min, its separation factor is relatively low, making it suitable primarily for separating easily filtrable slurries. This type of centrifuge is widely used for separating granular materials such as sugar, ammonium sulfate, and ammonium bicarbonate from their mother liquors, and it finds extensive applications in other industrial sectors as well.
The drum wall of a sedimentation centrifuge is non-porous. It operates on the principle that, due to the difference in specific gravity between the liquid and solid phases in a suspension, when the drum rotates at high speed, the liquid and solid phases separate under the action of centrifugal force and settle onto the drum wall at different rates. In some sedimentation centrifuges, the filter cake is discharged by a screw conveyor, while the filtrate flows out through an overflow port. This type of centrifuge is used for dewatering materials with significantly different solid-to-liquid ratios in easily filterable slurries and general slurries, as well as for highly dispersed, amorphous, insoluble materials.
Clarifying and separating centrifuges have solid drum walls without perforations, and are used to separate dilute suspensions and emulsions. This type... Centrifuge It has a very high rotational speed, typically ranging from 4,000 to 15,000 r/min, with a separation factor F > 3,500.