Strong Partnership: Shanghai Lushangyi Teams Up with Fudan University to Tackle the Challenge of Graphene Separation and Extraction
Release time:
2015-09-08
Overview:
In recent years, with the continuous advancement of technology, Centrifuge The industry has also experienced rapid growth, with continuously increasing market demand and expanding scale. However, as the market becomes increasingly saturated, the overall development of centrifuges is not optimistic, and the entire industry is poised to face a new round of challenges.
A centrifuge is a mechanical device that uses centrifugal force to separate the components of a mixture—whether it’s a suspension of solid particles in a liquid or a mixture of two immiscible liquids. It is primarily used for separating solid particles from liquids in suspensions, among other applications. In addition to seasonal factors, the development of the centrifuge industry is most significantly influenced by the increase in the commencement and resumption of construction projects. Moreover, various policy supports issued by government agencies have become the strongest driving force behind the industry's growth. Therefore, the industry should focus more on upgrading its products toward higher-end segments.

Recently, Manager Li from Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. and Professor Lu Hongbin from the Department of Polymer Science at the State Key Laboratory of Polymer Molecular Engineering (MEP) at Fudan University in Shanghai—a renowned domestic university—jointly discussed the separation and extraction of graphene as well as its potential future applications. According to Professor Lu, since Fudan University began using Shanghai Luxiangyi centrifuges in 2004, their performance and durability have consistently been excellent, earning high praise from both faculty and students.
In addition, Professor Lu also stated: “For the graphene project, we will continue to collaborate closely with Shanghai Luxiangyi Centrifuge Instrument Co., Ltd.” In response, Manager Li expressed his gratitude to Fudan University and his full confidence in Professor Lu! We at the editorial team believe that in the future, both sides will achieve even greater cooperation in this field and make further contributions to China’s centrifuge industry.

The photo shows Professor Lu Hongbin holding the certificate for the “Water-Based Graphene Anti-Corrosion Coating” project under the 2015 “Alliance Program.”
About Shanghai Lu Xiangyi:
Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. is a Chinese company that has obtained FDA certification for its centrifuges in the United States. It was established on the basis of the bankruptcy of the former Hunan General Instrument & Meter Factory (referred to as Xiangyi General Factory), and is a high-tech enterprise. The company’s headquarters is located in the Zhoupu Industrial Park, Pudong New Area, Shanghai, covering an area of 7,000 square meters with standard factory buildings totaling 9,000 square meters. Its branch office is situated at No. 2 Guyuan Road, High-Tech Zone, Changsha, Hunan Province, in Building A5 of the Hunan Lugu International Medical Device Industrial Park. The branch office boasts GMP-compliant factory facilities spanning 3,000 square meters.
Shanghai Luxiangyi is a professional manufacturer of centrifuges with a long history, strong technical expertise, advanced production equipment, comprehensive testing facilities, reliable product quality, stable performance, and a full range of specifications. It is renowned for its exquisite design, innovative styling, and superior craftsmanship, making it an ideal choice for universities, research institutions, biopharmaceutical companies, medical facilities, petrochemical industries, and other related fields.
Over more than four decades of development, the company has successively designed and manufactured GL-25M, China’s highest-speed high-capacity refrigerated centrifuge. It also produced China’s first continuous-flow rotor made of 316L stainless steel. Building on the 2400 ml square rotor, the company developed a 2000 ml round rotor that is particularly convenient for extraction in the pharmaceutical industry, complete with a 316L stainless steel centrifuge cup—thus maximizing the capacity of round rotors and providing top-quality supporting equipment for GMP-certified enterprises in the pharmaceutical sector. Furthermore, the company designed a super-core centrifuge that achieved a breakthrough by enabling horizontal rotors to spin at 12,000 rpm. Additionally, it developed a specialized centrifuge for determining soil PF curves, providing a scientific basis for petroleum exploration and agricultural research.
As Shanghai Luxiangyi Centrifuge Technology gains increasing recognition within the industry, Shanghai Luxiangyi is actively expanding into international markets while continuing to meet domestic demand. Through platforms such as Alibaba’s overseas trade shows, we have received positive feedback from overseas customers regarding our products. Currently, our products are exported to more than 30 countries, including the United States, Germany, the United Kingdom, Canada, and Thailand.
Shanghai Luxiangyi is the only Chinese centrifuge manufacturer that has obtained FDA certification in the United States. It is also certified under the ISO9001:2000 quality management system and has received CE certification. The company consistently adheres to the quality principle of “Quality First, Reputation Supreme.” Its excellent pre-sales, in-sales, and after-sales services have earned widespread praise and acclaim from customers.
Introduction to the State Key Laboratory of Polymer Molecular Engineering at MEP
The National Key Laboratory of Polymer Molecular Engineering, supported by Fudan University’s “National Key Laboratory of Polymer Molecular Engineering,” received approval from the Ministry of Science and Technology for its establishment in October 2011.
The laboratory originated from the “National Education Commission Open Laboratory for Polymer Molecular Engineering” (established in February 1994). In September 1999, it was reclassified as one of the first batch of Key Laboratories under the Ministry of Education and renamed the “Ministry of Education Key Laboratory for Polymer Molecular Engineering.” In December 2011, it was abolished upon approval for the establishment of a National Key Laboratory. During its 18-year operation, the laboratory underwent three evaluations by the Ministry of Education and consistently received excellent ratings (in 1998, 2003, and 2008). Subsequently, as an outstanding departmental key laboratory, it was recommended to participate in the Ministry of Science and Technology’s evaluation of National Key Laboratories in the field of chemistry, where it received good ratings three times (in 1999, 2004, and 2009).
The laboratory’s core discipline is Polymer Chemistry and Physics, a national key discipline at Fudan University. This discipline has a development history spanning more than 50 years since its establishment. Guided by the concept of “molecular engineering,” the laboratory integrates research on structure-property relationships, molecular design and synthesis, and materials preparation and application into a cohesive whole. With an overall orientation toward “basic research driven by major national needs and cutting-edge scientific frontiers,” and in response to the demands of disciplinary development and interdisciplinary collaboration, the laboratory builds upon its existing research foundation and has established four primary research areas: (1) High-performance modification of general-purpose polymers; (2) Design of biomedical polymers; (3) Functional mesoporous materials related to polymers; and (4) Multi-scale preparation science and technology for polymers.
The laboratory boasts a research team that features a well-balanced mix of senior, mid-career, and young researchers, with a highly rational structural composition. Currently, the laboratory has 3 academicians of the Chinese Academy of Sciences, 6 Changjiang Distinguished Professors, and 12 recipients of the Outstanding Young Scientists Fund. With strong scientific research capabilities, the laboratory has successively served as the lead institution for numerous major national projects, including the 973 Program, the National Major Scientific Research Program, key projects under the 863 Program, and major and key projects funded by the National Natural Science Foundation. Additionally, the laboratory has undertaken a large number of international collaborative projects, key provincial and ministerial-level projects, and horizontal collaborations with enterprises, ensuring a full workload. The laboratory has published several textbooks and monographs, and has published numerous academic papers in prestigious domestic and international journals. It has also delivered invited talks or keynote speeches at international conferences on multiple occasions. The laboratory has received numerous national second-class awards, as well as first- and second-class awards at the provincial and ministerial levels. Moreover, it has successfully organized many international and domestic academic conferences. Since implementing open research programs and a senior visiting scholar program, the laboratory has attracted a group of outstanding mid-career and young experts from both home and abroad, fostering extensive academic exchanges and talent development. Guest researchers have achieved remarkable results. Today, the laboratory has become an important base for polymer science research in China, making positive contributions to the economic development, social progress, and talent cultivation of both the nation and the Shanghai region.