Experimental Procedure for E. coli Fermentation and Harvesting

Release time:

2014-09-12


Overview:

The fermented E. coli cells are separated by high-speed centrifugation for 20 minutes. The temperature inside the centrifuge chamber is maintained at 4℃. The supernatant is removed, and the E. coli cells are collected and then freeze-dried.

1. Seed Inoculation: Inoculate the freeze-dried vial or glycerol stock seed into an LB medium shake flask for activation. Typically, an antibiotic corresponding to the resistance marker can be added. Then, incubate the flask on a shaker at a constant temperature.

2. Preparation of the fermentation medium: For shake-flask fermentation, it’s straightforward—just use an autoclave for sterilization. For fermenters, first clean the tank thoroughly, then add the ingredients, and finally sterilize it.

3. Transfer the well-cultured seed culture into the fermentation medium at a specified inoculation amount. If using shake-flask fermentation, no central control is typically required—simply remove the flasks when the fermentation time is up. However, if using a fermenter, you’ll need to add nutrients during the process, adjust the pH value, and carefully monitor the dissolved oxygen level and agitation speed. Pay special attention to ensuring the sample liquid remains tightly sealed when taking samples; if the sample liquid spills around uncontrollably, it can easily lead to bacteriophage contamination.

4. Whether it’s enzyme production, protein synthesis, amino acid production, or any other product, the yield must be measured.

5. After releasing the tank, also pay attention to the collection, use, and inactivation of the culture medium to strictly prevent phage contamination.

6. The fermented E. coli cells are separated by high-speed centrifugation for 20 minutes. The temperature inside the centrifuge rotor is maintained at 4℃. The supernatant is removed, and the E. coli cells are collected and then freeze-dried.


The key instrument for collecting E. coli is a centrifuge. Shanghai Luxiangyi Centrifuge recommends the GL-21M floor-standing high-speed refrigerated centrifuge, equipped with a 500 ml × 6 aluminum alloy angle rotor. Alternatively, the GL-12M large-capacity refrigerated centrifuge paired with a 1000 ml × 6 aluminum alloy angle rotor can also be used.