Lu Xiangyi’s portable centrifuge supports total phosphorus monitoring of surface water.
Release time:
2020-04-01
Overview:
The China National Environmental Monitoring Center has issued Notice No. [2019]603 of the Center’s Water Division, announcing the release of the “Provisional Technical Regulations for On-site Pre-treatment of Total Phosphorus in Surface Water.” To promote the improvement and refinement of the national surface water monitoring technology system and to standardize the technical requirements for total phosphorus monitoring in surface water, the regulations specify three turbidity levels for water quality: less than 200, between 200 and 500, and greater than 500. When the turbidity exceeds 500, a centrifuge must be used. The specific parameter is a capacity greater than 1 liter (i.e., the standard rotor for the TD5M multi-tube rack automatic balancing centrifuge, which holds 500 ml × 4 tubes), with a rotation speed of 2,000 rpm and a centrifugation time of 2 minutes.
Total phosphorus and total nitrogen have become the primary pollutants affecting surface water quality. To address the increasingly serious issue of nitrogen and phosphorus pollution, the Ministry of Ecology and Environment has incorporated total phosphorus and total nitrogen as essential indicators into the national monitoring and evaluation system for automatic water-quality stations. Moreover, the recently released regulations issued by the China National Environmental Monitoring Center further clarify the methods and technical requirements for on-site pretreatment of total phosphorus in surface waters. These guidelines apply to manual monitoring of total phosphorus in surface waters (including rivers, lakes, reservoirs, and other bodies of water), and automatic water-quality monitoring systems may follow these guidelines by reference.

Lu Xiangyi’s portable centrifuge for on-site testing
To meet the demand for turbidity testing of raw surface water samples containing total phosphorus at sampling sites, engineers from Shanghai Lushangyi Centrifuge have further developed two portable TD5M and TD5.5 benchtop low-speed centrifuges by adding a configuration that allows them to be powered by mobile power banks. After conducting full-load operational tests on-site, the accompanying mobile power supply was found to operate normally for over an hour when used at a rotational speed of 2,000 rpm with four 500 ml tubes fitted into the rotor. In actual testing, the TD5M even managed to run continuously for up to one and a half hours, easily satisfying the needs of most users who require centrifugation of around ten batches of samples on-site.


Main technical parameters of the TD5M machine:
Model | TD5M |
Maximum rotational speed | 5000r/min |
Maximum relative centrifugal force | 5030xg |
Maximum capacity | 500mlx4 |
Rotational speed accuracy | ± 30 rpm |
Time setting range | 1 second to 99 minutes and 59 seconds |
Overall machine noise | <65 dB(A) |
Power supply | AC 220V 50Hz 10A |
Overall machine power | 750W |
External dimensions (L x W x H) | 460mmx540mmx340mm |
Net weight | 31kg |

Moreover, the portable power bank equipped with this device weighs approximately 11.5 kg, making it easy to carry and capable of meeting power supply needs in various environments.
Shanghai Luxiangyi Centrifuge Instrument Co., Ltd. is a specialized manufacturer of centrifuges with a long history, strong technical capabilities, sophisticated production equipment, comprehensive testing facilities, reliable product quality, stable performance, and a full range of specifications. The company is renowned for its exquisite design, innovative styling, superior craftsmanship, and high-quality products. Its centrifuge equipment is widely used in fields such as higher education institutions, scientific research organizations, biopharmaceuticals, healthcare, and petrochemical industries. The two portable centrifuge models recently developed for turbidity testing of raw water containing total phosphorus in surface waters are expected to soon play an important role in water quality monitoring, providing robust equipment support for the pretreatment of water samples from various water bodies.