Standard Equipment Checklist for the Microbiology Laboratory
Release time:
2020-04-10
Overview:
The microbiology laboratory is one of the fundamental laboratories in the field of biology. In a fully equipped microbiology laboratory, the instruments we routinely keep on hand include the following:
1. Ultra-clean workbench
Microbial cultures are all carried out under sterile conditions in specific culture media; therefore, sterile cultivation inevitably requires a clean bench to provide a sterile working environment.
2. Incubator
Incubators come in various types, and their primary function is to provide a suitable environment for microbial growth. Biochemical incubators can only control temperature and are suitable for the plate culture of general bacteria; mold incubators can control both temperature and humidity, making them ideal for cultivating molds; CO2 incubators are particularly suited for the cultivation of anaerobic microorganisms.
3. Balance
A balance is used to accurately weigh various reagents. The type commonly used in laboratories is the electronic balance, which comes in different levels depending on its precision.
4. Microbial Homogenizer
It is used to extract bacteria from solid samples. Preparing microbial detection samples using a microbial homogenizer has the advantages of sample contamination-free, non-damaging, no temperature rise, no need for sterilization, and no requirement for washing utensils. It is a highly convenient instrument commonly used in microbiological experiments.
5. Colony Counter
A colony counter can assist operators in counting the number of colonies. By means of magnification, photography, and manual counting, it accurately determines the colony count. Some high-performance colony counters can even be connected to a computer to perform automated counting.
6. Microwave oven/electric stove
For rapid heating of solutions and for melting solid microbial media.
7. Autoclave
Most of the experimental materials, reagents, and culture media used in microbiology should be rigorously disinfected and sterilized. Sterilization autoclaves come in various sizes and models; some are manual, while others are fully automatic. Users need to select the appropriate model based on their specific requirements.
8. Pipette
Liquid measuring instruments are used for the precise measurement of various liquids. Common liquid measuring instruments include graduated cylinders, pipettes, micropipettes, calibrated test tubes, and beakers.
9. Low-temperature refrigerator
The refrigerator is an essential piece of equipment for storing reagents and samples in the laboratory. In microbiological experiments, some reagents must be stored at 4°C, while others require storage at -20°C. Experimental personnel must carefully check the storage conditions for each reagent and ensure that they are kept at the appropriate temperature.
10. Biological safety cabinet
Some of the reagents and microbial samples involved in microbiological experiments are toxic and can pose significant health risks to operators. To prevent the spread of harmful airborne particles and aerosols, biological safety cabinets can be used to provide safe protection for operators, samples, and the environment against cross-contamination among samples and between samples and the environment.
11. Shaker
A shaker is a commonly used laboratory instrument. During microbiological experiments, when culturing bacteria in liquid media, it is necessary to shake the culture at a specific temperature.
12. Pure water unit
Ultrapure water systems produce pure water free of impurities and contaminants, ideal for various precision tests.
Pure water systems include distillers and pure water machines. Distillers are inexpensive, but require someone to be present during the water-production process. Pure water machines are more expensive, yet they are easy to use and can store a certain amount of purified water. There are different grades of purified water available; in experiments, both reagent preparation and medium formulation require the use of purified water. Generally, ultrapure water is used for all food testing.
13. Biological microscope
Because microorganisms are small in size, a biological microscope is required for their observation. A biological microscope is used to examine the structure and morphology of microorganisms and tiny objects.
14. Freeze dryer
Primarily used for the drying of bacteria, microorganisms, yeast, and similar organisms. This method is ideal for preserving products that are prone to dehydration; after rehydration, these products can regain their original characteristics without compromising their biological activity. Through freeze-drying, materials such as bacteria are rendered in a dry state, thereby preventing any chemical alterations from occurring.
15. Spectrophotometer
A spectrophotometer is used in microbiological experiments to determine the concentration of microbial suspensions, enabling the accurate selection of an appropriate incubation time. Typically, the bacterial suspension concentration is measured at a wavelength of 600 nm.
16. Constant-temperature drying oven
A constant-temperature drying oven is used to dry items after sterilization and washing. These ovens come with various temperature control ranges, allowing users to select the appropriate setting based on their experimental needs. For example, certain plastic utensils can only be dried in an oven set at 42–45°C, while general glassware can typically be dried at 60°C.
17. Constant-temperature water bath pot
A constant-temperature water bath is primarily used for concentrating solutions, distilling liquids, and immersing reagents. A water bath is a temperature-control device; water-bath temperature control is relatively rapid and ensures thorough contact with the sample. Some microbial reactions require incubation in a water bath at 37°C, 42°C, or 56°C. Therefore, a constant-temperature water bath can precisely provide the temperatures needed for these reactions.
18. pH meter
It is used to precisely measure the pH value when preparing reagents, thereby ensuring the accuracy of the prepared solutions. Sometimes, a pH meter is also employed to determine the acidity or alkalinity of sample solutions.
The TGL-25M benchtop high-capacity, high-speed refrigerated centrifuge is a new-generation intelligent centrifuge featuring internationally advanced technology. Equipped with a powerful and intelligent control system, it is the preferred choice for applications in molecular biology, protein research, DNA and RNA analysis, cell separation, and clinical medicine. Its maximum rotor speed reaches 25,000 r/min; its maximum capacity is 100 ml × 6; its speed accuracy is ±30 r/min; its time-setting range spans from 1 minute to 9 hours and 59 minutes; its temperature-setting range is from -20°C to +40°C; and its temperature-control accuracy is ±1°C.

19. Centrifuge
A centrifuge accelerates the sedimentation rate of particles in a liquid, separating substances with different sedimentation coefficients and buoyant densities from the sample, and is used to collect microbial cells as well as other precipitates. Centrifuges come in two types: refrigerated and ambient-temperature. Some samples are unstable at ambient temperature and thus require a low-temperature environment; this depends on the specific type of sample. Centrifuges are also essential for determining the levels of sorbic acid and benzoic acid in cakes and bread.
20. Liquid nitrogen tank
Liquid nitrogen tanks are used to store liquid nitrogen, which can be employed for the long-term preservation of various microorganisms, including bacteria, yeasts, molds, and macrofungi.
21. Rotary evaporator: an ideal device for concentration, drying, and recovery;
22. Muffle furnace: Used for heating and calcining fuels; when determining the ash content of flour and the concentrations of various metallic elements in food, samples must be calcined using a muffle furnace.
23. Adjustable electric furnace for heating objects;
24. Ultrasonic cleaners can not only be used to wash reagent bottles, but also accelerate the dissolution and reaction of substances.
24. Electric powder sieve, used to determine the fineness of the sample being tested; magnetic stirrer, equipped with stirring and heating functions, ensuring thorough mixing of reactants and uniform temperature distribution.
25. The fully automatic nitrogen analyzer determines the nitrogen content of the substance being tested through a process involving digestion, distillation, and titration, and then calculates the crude protein content of the sample.
26. The variable-speed oscillator allows you to adjust the oscillation speed as needed, ensuring thorough mixing or reaction of the sample.
27. A high-speed tissue homogenizer, used to grind solid samples to be tested, such as pastries and cookies;
28. Biochemical incubators and constant-temperature incubators—equipment used for culturing bacteria such as Escherichia coli, total colony count, Salmonella, and Shigella during microbial testing;
29. An enzyme-linked immunosorbent assay (ELISA) reader is an instrument that measures the absorbance of a sample at a specific wavelength. It can be used to detect substances such as aflatoxins, clenbuterol, and chloramphenicol in food products.
The above introduces the basic instrument configuration for a microbiology laboratory. When setting up the laboratory, you will also need other consumables, such as alcohol lamps, test tube racks, Erlenmeyer flasks, graduated cylinders, glass test tubes, sterilized pipettes, drying racks, scissors, forceps, degreased cotton wool, gauze, test tube baskets, sterile sampling and weighing bags, inoculation loops, filters, and more.